spy-bot.net

Paving & Driveways Tips & Tricks

PDD1 Make A Platform Bed – More Space In Your Bedroom.

Word Count:
457

For the best Patios Dublin company, call Paving Driveways Dublin.

Bedrooms form the core of the house. Everyone wants to decorate the bedroom very elegantly and nicely so that it looks beautiful and cool. The bed is the center of attraction, but sometimes the small size and lack of space of a bedroom makes it look cluttered and untidy. In this situation platform beds are the best option one can go for.
A platform bed is a bed which consists of a mattress placed on a solid platform raised off the floor by legs or framing. The space below …

platform bed,platform beds,wooden platform bed,metal platform bed,platform bed plans,

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
Bedrooms form the core of the house. Everyone wants to decorate the bedroom very elegantly and nicely so that it looks beautiful and cool. The bed is the center of attraction, but sometimes the small size and lack of space of a bedroom makes it look cluttered and untidy. In this situation platform beds are the best option one can go for.
A platform bed is a bed which consists of a mattress placed on a solid platform raised off the floor by legs or framing. The space below the platform bed can be utilized for storage purposes. Platform beds do not have springs.
Types of platform bed:
One can select a platform bed from the two varieties available.
* The wooden platform bed – Wooden platform beds are usually made from oak wood or maple wood. They offer warmth as well as beauty to any type of bedroom decor. They are available in many different sizes like full size, king or queen size, and twin size. Though they are usually designed to support a mattress, they can be changed and customized for use with box springs. Altering the height of the headboard and lowering the size of the slate board allows for this. The wooden platform bed is generally given a Danish oil finish.
* The metal platform bed – Metal platform beds come in many varieties from the contemporary metal platform bed to the traditional ones and they are all available in a variety of colors. The beds have predrilled holes to allow for the adjustment to the height of the bed.
* Special quality steel is used for more strength and durability of the bed. To avoid stripping and over tightening of the bolts a special Allen key is used. Steel cross bars sheets of Masonite are used for support at the side railing.
* DIY beds, from plans and instructions available on the internet
Advantages of platform beds:
1. You can make a platform bed yourself from readily available plans found on the internet
2. They provide a better mattress support area since it does not have a box spring underneath.
3. It increases the storage space and makes the room looks clean and tidy.
4. These beds are very affordable.
5. Allergies to dust can be avoided, as dust does not get collected under the bed.
6. They are portable and comfortable.
To buy a platform bed:
There are many web sites and on line merchants from where you can buy a platform bed. These web sites offer the latest designs for platform beds at very reasonable prices.
They are available in a wide range of prices so its very easy to choose a bed that suits our budget. Alternatively you could make a platform bed, the plans are readily available on the internet

PDD1 Major repairs of bathroom unit.

Word Count:
754

For the best Patios Dublin company, call Paving Driveways Dublin.

Bathroom and toilet officially speaking is a bathroom unit. A space it takes makes only 6-8% of the general flat area, but considering its importance it is out of competition.

bathroom, bathroom design, bathroom cupboards, sink, shower

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
Bathroom and toilet officially speaking is a bathroom unit. A space it takes makes only 6-8% of the general flat area, but considering its importance it is out of competition. It is possible to imagine an apartment without any room or even without a kitchen (there is no kitchen as such in “studios”, it is joined with the living room), but it is quite impossible to imagine an apartment without a bathroom unit. Major repairs of a bathroom unit is technically quite a difficult task, it is not a joke. You should leave this work only for highly skilled specialists.
At first, if a quality of mounting and finishing works can be checked by anyone (for example, a wall is curved, a window or a door does not close, or tiles are put roughly), then a quality of plumbing mounting, sewage and electrical systems you can’t check.
And secondly, as a result of bad work your neighbours can be flooded, constantly clogged sewage system, short circuit failure in the electric wiring due to the contact with water and other serious problems.
We have already written a lot about floors, ceilings and walls, therefore I will remind you briefly that all the materials must be water proof, and there must be damp proofing on the floor. It is also very important to observe the geometry of your bathroom; otherwise it will be difficult to put tiles and to place sanitary equipment in a right way.
Electric wiring and electrical equipment.
A bathroom and a toilet impose the special requirements on everything that is related to electricity. An electrical equipment, used in a damp room, must have grounding, wiring must be three-wire (phase, zero, ground). Lamps, wall outlets, switches are used with the degree of protection.
Water supply and sewage system.
Steel, copper, metal-polymeric and polypropylene pipes are used for hot and cold water supply. PVC pipes are used for the sewage system. Water is cut off by ball stop valves. If plumbing specialist uses screw-thread connections, it is important not to brick them up in a wall to have an access to them. The welded connections of steel pipes must be grounded to avoid corrosion. It is necessary to put pre-filters on all water-pipes to avoid damages of expensive sanitary equipment. It is better to set filters with drainage, as it facilitates their service.
While connecting towel dryer “childish” error is the wrong supply of hot water.
If sanitary technician says that it is impossible to supply hot water to a towel dryer, trust him and set an electric towel dryer. Sewage-pipes are mounted with a slope of about 5% and if possible avoid corners of 90 degree. I strongly recommend buying all the pipes and sanitary engineering armature only of the known producers and preferably in the specialized shops.
Revisory access holes for the maintenance of plumbing-sewage system must not be too little, otherwise their purpose is lost and in case of some problems it will be necessary to break the walls.
All of these are basic moments of plumbing and sewage system mounting, and in general all of this must be the business of your sanitary technicians.
Let’s discuss ventilation.
It is obligatory to mount drawing ventilation.
What should be considered when buying a ventilator? First of all it is its power, it must correspond to the size of a room, and second it is its noise (measured in decibels). Both descriptions are specified on a ventilator. Sanitary engineering equipment. Here we will discuss mixers, water heaters, ceramic bathroom fittings and etc.
For a shower and a bath pay attention to the models with a thermostat. There are two regulators in them. One regulates a temperature, and another regulates water pressure. To my mind, it is exceptionally convenient.
Pay attention to toilets flushing systems, which are wall mounted, and wall toilet sinks for them.
Electric water heaters. They are divided into running and storage. Running water heaters are smaller, but are more powerful, than storage ones. It can reach 16 kW. Having a lot of other electric devices in an apartment can create heavy load on your electric system.
Whether to have a spa or not – I will not advise anything, because a good bath is a very expensive thing and it’s up to you to decide, whether to pay ?1000-?3000 for it.
I will only tell you, that connection of a spa does not differ from ordinary bath connection.
I hope that these information will help you during repair works, when buying materials and dealing with builders.

PDD1 Major Contributing Factors That Affect Indoor Air Quality

Word Count:
733

For the best Patios Dublin company, call Paving Driveways Dublin.

Today, indoor air quality (IAQ) is an important environmental consideration. Because we spend approximately 90 percent of our time indoors, we must do everything possible to improve the air we breathe. During the energy crisis of the ’70s, Americans began to tightly close their workplaces and homes in order to conserve energy resources. Currently, many families have both parents working, with less cleaning time in the home. Ventilation and cleanliness play important parts in …

air conditioners, air conditioning, central air unit

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
Today, indoor air quality (IAQ) is an important environmental consideration. Because we spend approximately 90 percent of our time indoors, we must do everything possible to improve the air we breathe. During the energy crisis of the ’70s, Americans began to tightly close their workplaces and homes in order to conserve energy resources. Currently, many families have both parents working, with less cleaning time in the home. Ventilation and cleanliness play important parts in maintaining good air quality; although, the indoor environment is impacted by many factors.
Among the factors that may impact the quality of the indoor air in your home is the air drawn from outside through an air conditioning unit. Other factors may be tobacco smoke, radon, and cooking odors, as well as renovating and redecorating products, such as wallpaper, furniture and cabinetry, carpet, paints, varnishes, particle board, wood finishes, caulking, and adhesives. There are many sources of indoor air pollution in any home. Additional items include combustion sources such as oil, gas, kerosene, coal, and wood. Building materials and furnishings as diverse as deteriorated, asbestos-containing insulation, wet or damp carpet, and cabinetry or furniture made of certain pressed wood products. Included are products for household cleaning and maintenance, personal care, or hobbies. Add central heating and cooling systems and humidification devices; and outdoor sources such as radon, pesticides, and outdoor air pollution. Interior products in the home have the potential to impact the indoor air because they emit volatile organic compounds into the air. The quality of indoor air also involves cleaning materials, building materials, ducts transmitting heat and air conditioning, activities in the building, people, pets, and furnishings.
You must look at the whole picture. Cleaning products used in the home, as well as interior furnishings, should be low VOC (volatile organic compounds) emitters, with emissions, sometimes improperly called off-gassing, that dissipate quickly. Scientific studies have demonstrated that new carpet is one of the lowest emitters of VOCs into the indoor environment and that these emissions dissipate very quickly. The low-level VOC emissions and the harmless odor from new carpet dissipate within the first 48 to 72 hours after installation. Carpet has not posed any health problems for millions of users. Carpet is made primarily of the same innocuous materials found in clothing and other everyday fabrics; i.e., polyester, nylon, and olefin fibers, latex (synthetic rubber), and polypropylene (olefin) fabric backing.
There are many sources of indoor air pollution in any home. These include combustion sources such as oil, gas, kerosene, coal, wood, and tobacco products; building materials and furnishings as diverse as deteriorated, asbestos-containing insulation, wet or damp carpet, and cabinetry or furniture made of certain pressed wood products; products for household cleaning and maintenance, personal care, or hobbies; central heating and cooling systems and humidification devices; and outdoor sources such as radon, pesticides, and outdoor air pollution.
The relative importance of any single source depends on how much of a given pollutant it emits and how hazardous those emissions are. In some cases, factors such as how old the source is and whether it is properly maintained are significant. For example, an improperly adjusted gas stove can emit significantly more carbon monoxide than one that is properly adjusted.
Some sources, such as building materials, furnishings, and household products like air fresheners, release pollutants more or less continuously. Other sources, related to activities carried out in the home, release pollutants intermittently. These include smoking, the use of un-vented or malfunctioning stoves, furnaces, or space heaters, the use of solvents in cleaning and hobby activities, the use of paint strippers in redecorating activities, and the use of cleaning products and pesticides in housekeeping. High pollutant concentrations can remain in the air for long periods after some of these activities.
Common Factors That Affect IAQ:
People (exhalation, body odors, diseases)
Activities (work such as cleaning, using correction fluids, carbonless paper, pest control products, and personal activities such as wear fragrances and smoking)
Technology (photocopiers and laser printers)
Furnishings (furniture, draperies, floor coverings)
Finishes (paint, varnish, vinyl wall coverings)
Building materials (caulking compounds, adhesives, wood laminates)
Outdoor Air Quality
Inadequate or contaminated air handling units
Inadequate cleaning practices
Take a close look at this list. If you feel you are suffering from Inadequate Indoor Air Quality, you may find the remedy right here.
Here are some aditional sites that have quality information about air conditioning, a major contributor to better air quality…

PDD1 Main stages of repair works in the apartment.

Word Count:
1228

For the best Patios Dublin company, call Paving Driveways Dublin.

How to begin repair works of the apartment?
The first stage of the repair of old apartments is the destruction and dismantling first of all of the dilapidated walls and partition walls, removing the wall and ceiling coating. This stage is one of the most “dirty” stages of the repair.

decorations, painting, flooring, linen, doors, wiring, installation

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
How to begin repair works of the apartment?
The first stage of the repair of old apartments is the destruction and dismantling first of all of the dilapidated walls and partition walls, removing the wall and ceiling coating. This stage is one of the most “dirty” stages of the repair.
One more among the most important and “dusty” works is the window block replacement. It is necessary to do this first of all because dirt and dust will be unallowable during following stages and it is prohibited at all to open windows during painting and wallpaper works (large drops of the temperature and moisture are unallowable). After mounting windows and windowsills it is necessary to pack them immediately in polyethylene film and to cover windowsills in addition by the fiberboard (in order to prevent scratches).
The following stage is wiring. Wiring can be installed in walls or along the floor. Wiring is made inside the pipes to ensure electrical safety and increase reliability. The pipe protects wiring from external damages and allows to replace the wire completely without breaking walls and floor simply by inserting the new wire instead of the old one.
House Painting follows the wiring. The frequent mistake during the simultaneous conducting of such works occurs when workers forget to lay out one of the cables and house painters have already plastered and smoothed out the wall. As a result, additional works are necessary to seal chases on the finished wall. The places of the feed switch and wall outlet location and their number must be thought-out in advance. The scheme of power wiring is usually included into the design project.
Later on the system must be ready to service in case of failures. In addition to the wirings, the telephone cable and the TV cable are laid out. The power cable should not be laid out near the telephone and antenna cables to avoid noise pickup and interference. The most peculiar moment is laying out the TV cable. In order to make two (or three) TV sets in the apartment the second cable is often simply “firmly soldered” in parallel, so the cable resistance is lowered. As a result, the display quality is deteriorated, many programs can’t be received and etc. In order to avoid such situation it is necessary to invite a specialist with special equipment. He will measure the signal level of the each TV-feeder and install TV-amplifiers or TV-filters.
Painting is the most long-term process, that is why it is conducted simultaneously in all premises, if it is possible. Delays are linked with the technology. Each applied layer of the plaster (or filling in finishing) must dry completely before the work will continue.
Works in sanitary arrangements and the kitchen begin simultaneously with house painting. It is better to fulfill so-called “dirty” works in the first place and simultaneously. In accordance with the plan of the sanitary technician location welding, wall chasing and pipe run are conducted. Steam radiator admissions are prepared, taps and brackets are mounted, but radiators are not installed.
Then works in sanitary arrangements are conducted according to the plan. The bath is mounted, then walls are smoothed out and the tile is laid on walls. The following stage is assembling ceiling and laying tiles on the floor. And at last other sanitary devices, mixers and accessories are mounted.
After wiring, installation of rosette plates and terminal boxes the voltage is checked in all point. Ends of wiring are insulated and laid out into rosette plates. Sockets and breakers are not installed during this stage in order to save their surface appearance. The finish puttying of walls is conducted simultaneously. The technologically exact control of drying of the layer of the plaster (filling) is carried out by drymeter. It is a special instrument that measures moisture of the material.
The following stage is the process of fill. Fill can be made with different materials – from usual masonry cement-sand mixture to self-aligning floors. The advantage of the simple mixture is its cheapness, the disadvantage is that such mixture is much harder aligned at the level and the final dry time of such fill is 40 days, only then the next stage of the work with floor can be conducted, i.e. the period is too long. Self-leveling self-aligning floors are much more expensive, but more technological. Aligning occurs almost “automatically” i.e. fluid solution of mixture is poured out, then it runs and you receive the horizontal surface. The final dry time is 15 days i.e. you have significant time economy. The system “warm floor” is installed into the fill. If the so-called “wet processes” are inapplicable the technology of the dry aligning (the fill technology) is used bases for floors with adjustable floor battens are mounted.
After fill door boxes and door are installed. Installation of doors must take into the account thickness of future floor covering. After installation the door can be taken off its hinges and removed until the end of repair or packed into polyethylene film to protect from damages. Simultaneously ceiling can be painted and the tile can be laid in that premises where it was planned. The tile must be laid on the absolutely dry overlay.
Finishing of the floor mounting depends on the planned covering. In most cases (if finish covering is not the tile) fill is covered by bitumen mastic and plywood sheets are laid. They are fixed to the floor by self-tapping screws. One plywood sheet is fixed by 30-50 self-tapping screws to provide the close fixing of plywood and long-term service of the floor without squeak and bulging. The plywood gives the additional heat- and acoustic insulation. After mounting of the plywood is finished, wallpaper for painting can be pasted on walls.
In premises where finish covering of the floor is laminated flooring or parquet hoard, the ordinary wallpapers are pasted (not for painting) in the first place. Then the floor covering is mounted.
If finish covering of the floor is the block parquet, the parquet is laid in the first place, then it is scraped and covered by one layer of lacquer. After this the ordinary wall-papers are pasted and the parquet is covered by the rest layers of lacquer (depending on the quality of the parquet and lacquer). The mentioned consequence is linked only with such scrambling process when the great amount of dust is created. In spite of the fact that good floor grinders are equipped with the vacuum cleaner, the sufficient amount of dust is precipitated on surrounding subjects including walls. Dust is very acerbic and is badly washed off. That is why in order not to damage wallpapers, they are pasted after scrambling and in order the parquet do not absorb the surplus moisture it is covered by the one layer of lacquer before wallpaper pasting.
After this the main works can be considered to be finished. It is left only to install the plinths, decorative elements, breakers and sockets, curtain holders, to hang doors, plant-bands and others.
In conclusion it is necessary to note that the sequence of works was listed in general and can change depending on the definite situation – the number of rooms in premise, your resources, peculiarities of the construction of the multilevel premises. It is based on common sense and every person capable of analysis can independently create such a sequence.

PDD1 Maintaining Your RV Air Conditioners

Word Count:
503

For the best Patios Dublin company, call Paving Driveways Dublin.

Having your air conditioner in tip-top condition when summer is round the corner should be your top priority, especially if you have a RV air conditioner. In fact, RV air conditioners should be maintained on a regular basis as they have many parts such as motors, compressors and other components. Absence of regular maintenance can lead to expensive repair bills that could spoil the entire fun of the summer vacations.

central Air Conditioners

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
Having your air conditioner in tip-top condition when summer is round the corner should be your top priority, especially if you have a RV air conditioner. In fact, RV air conditioners should be maintained on a regular basis as they have many parts such as motors, compressors and other components. Absence of regular maintenance can lead to expensive repair bills that could spoil the entire fun of the summer vacations.
RV air conditioners are similar to split system air conditioners with the condenser and compressor units installed outside on the roof and the air-cooling unit installed inside on the ceiling. One cooling unit is enough for an entire office space but if the space is over 35 feet in length, you may need two units. With the summer round the corner, here are some tips to keep the RV in good operating condition.
The filter should be changed or washed at least once a month. Disposable filters should be replaced once a month when the RV air conditioner is in use and the reusable filters should be washed with water and left to drip dry before reinstallation. You must avoid having clogged filters, as they would lead to less efficiency, higher running costs and potential problems with other components of the system such as the evaporator coil. A damp cloth with a little detergent should be used to clean the entire unit to remove dirt and dust.
The RV air conditioner’s efficiency could be seriously impaired if the evaporator coil is not kept clean and free of damage. Since this coil is located on the back of the rooftop, it is most vulnerable to damage caused by trees, leaves and other environmental hazards. Moreover the cold refrigerant is circulated in these coils. It is, therefore, necessary to clean these coils with a soft bristled brush to remove accumulated dirt. It would be a good idea to provide shields for the fins and coils.
As a lot of condensation might occur due to the external location of the RV air conditioners, the gasket seal between the ceiling and the bottom of the unit should be checked regularly. The drainage holes in the condensate pan should be cleared of debris such as leaves. To avoid leakage of the condensate into the RV, clogs must be removed at the earliest.
Before going on a summer trip, you should start your RV air conditioner and make sure that all systems like the fan and temperature controls work properly. The power source should be sufficient for running a RV air conditioner. A 15-amp extension cord to the RV air conditioner might not be sufficient to deliver the power required to run this unit. You must check the power requirement especially the amperage and then make suitable arrangements to install proper switches and circuit breakers. Insufficient power can lead to serious damage to motors, compressors and other components.
If you want to enjoy the summer with your RV air conditioner, you must ensure proper and regular maintenance of the same.

PDD1 Maintaining The Clean Carpet Look

Word Count:
309

For the best Patios Dublin company, call Paving Driveways Dublin.

Tips on keeping your commercial carpets looking new for many years.

Carpet, carpet cleaning, flooring

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
Are you frustrated that your carpets look nothing like they did when you first bought them? Probably, so are many other homeowners. Well, there are fortunately some things once can do to prevent carpet disasters as the one we have mentioned above.
Vacuuming is an essential step to keeping carpets clean. Many of us hate to vacuum yet are angered at the fact that our carpets continue to get dirtier and dirtier. If youre serious about maintaining your carpet, you need to do vacuum a minimum of once a week  not just when your carpet looks a bit dirty. You also want to take care of spills and messes right away. Allowing these to linger on your carpet for long could cause problems later down the road.
We touched on stains a bit in the above paragraph. What you have to understand is that stains need to be tended to promptly. Otherwise, they can remain in the carpet fibers and create an unsightly focal point. Anytime you see a fresh stain develop on your carpet, get a cloth on it and absorb the moisture. Some special solution for stains may assist in removing it from the fibers.
Even with regular vacuuming, carpets need a bit of some extra care. Shampoo is up to this task. Your carpets should be shampooed a minimum of two times a year, depending on what type of abuse your carpet has seen. If a family member constantly travels around the house with chemically-contaminated shoes and materials, it might be best to get your carpets shampooed more often. You can find a cleaning machine at most local stores  including your local grocery store. Make sure to keep your carpet vacant as it will remain wet for a few hours following the cleaning process. Placing some fans in the room should help expedite the process.

PDD1 Luxury Outdoor Rooms

Word Count:
1490

For the best Patios Dublin company, call Paving Driveways Dublin.

This article informs the reader about outdoor room options and the amenities that can be included.

luxury, home, home improvement, outdoor, patio, lifestyle

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
As the controversial real estate bubble tumbles toward its imminent burst, homeowners look for new ways to increase their home’s value. In the past, you could slPDD1 some paint on a wall and bam, instant home improvement. As more and more people choose to spend time at home versus going out, they want their homes, or at least certain areas, to feel like a retreat – their own private oasis.
According to research from the Propane Education & Research Council PERC, 35 percent of homeowners surveyed currently have a finished outdoor room and one in three of those homeowners who do not 34 percent plan to design and furnish an outdoor room by spring 2007. When you apply this data to everyone, more than half of United States homes could have an outdoor entertaining area some time next year.
We are seeing a big trend in people investing in the outdoor living areas, said Leslie Wheeler, Hearth, Patio & Barbecue Association Director of Communication. With more people looking for ways to enhance their homes, it isn’t surprising that they are turning to their backyards, decks and patios. Homeowners want all the conveniences of an indoor kitchen outdoors such as an island complete with refrigerator, grill, sink and countertop surface.
There are wonderful products on the market today to extend the outdoor living season and make outdoor living comfortable and enjoyable. Most consumers who invest in an outdoor living and entertaining area think that their investment with yield a return, should they decide to sell their home or borrow against it. Industry professionals interviewed for Designing Out: The Home Lifestyle Report agree that a home’s outdoor space can add as much as 30 percent to the total value of a property.
Lifestyle factors are also driving consumer demand for outdoor living spaces, with 50 percent of survey respondents saying they spend more time at home than they did five years ago. Survey respondents also said that relaxation and wanting to spend more time outside were the primary drivers for an outdoor room, with entertaining coming in a surprising last among the top five reasons listed.
If you’re just hearing about this trend and are not sure where to start, Katherine Whiteside, best-selling garden and cookbook author advises people to start simply. By definition, an outdoor room is simply an outdoor area that homeowners can use for relaxing, cooking and entertaining, said Whiteside. By adding some furniture and propane appliances to an existing patio, garden or deck, you have the beginnings of a great outdoor room.
When planning your outside room, Whiteside recommends paying attention to your climate.
Think about protection from the elements: sun, rain and cold. Use a market umbrella or a canopy hung with mosquito netting to protect yourself from sun and rain. But what happens when the evenings get cold? Consider a propane tabletop heater. At 3 feet tall, they can heat up to 5 feet in diameter. Outdoor Leisure just came out with a spectacular Bistro Tabletop Heater with a hammered bronze powder finish. The same company also offers a gas light patio heater. If you have the space, install a propane fire pit, which can be used during spark bans and is marvelous for putting your feet up while stargazing.
Protection from the elements leads right into comfort. You have to be warm, said Whiteside, so think about installing a porch floor with propane radiant heating. You need a place to sit down, so think about comfortable furniture. And if you live in an area near water, bugs are a consideration. A propane mosquito chaser can keep pesky insects away from you and your guests.
No outdoor room would be complete without a place to dine and a grill. Today’s propane grills come with all sorts of accessories that make creating appetizers and a main course a snap. You can get a rotisserie, a grill with a burner next to it, even woks. And, if you have three or more propane-fueled appliances, consider putting in an underground tank, so there are no unsightly above-ground tanks and you won’t have to worry about running out of fuel during your backyard party.
The industry’s top-selling appliances in the outdoor living category mirror the preferences of PERC’s survey respondents and Whiteside’s suggestions. After outdoor lighting 94 percent, other propane appliances dominate the list of must-have accessories: 86 percent of those surveyed said gas grills and mosquito eliminators were a necessity, followed by outdoor fireplaces 67 percent and patio heaters 53 percent.
Whether you live in a shoebox or a Mediterranean oceanfront mansion, outdoor rooms have taken the forefront and summer is the perfect time to clean up your backyard and transform it into an outdoor living space where your children can play and you can relax or entertain friends. One ay to improve the value of the backyard is to add an attractive and functional structure, such as a gazebo, pavilion, poolside cabana, or playhouse – even a yoga hut, artist’s studio, dog house, music practice room, hobby workshop, or any other private retreat.
Another possibility is to build a backyard home office, away from the distractions of the house.
No matter how large or small your yard, a water garden, pond or fountain is a great way to create a tranquil getaway just feet away from your back door.
Steve Sandalis, owner of Mystic Water Gardens in Los Angeles who has a large celebrity following, believes adding a water feature brings a peaceful element to any backyard, and in his opinion,the bigger, the better. Consider making your water feature bigger, he said, allowing it to meander through the backyard rather than being tucked away in the corner. It will create a stunning environment in which to live and relax.
Before you buy materials, determine the size of the water feature you want. Steve suggests going a little bigger than what you think will be the right size because once the landscaping grows and fills in, your water feature shrinks. To create a low maintenance water feature construct your feature that is essential an ecosystem that works with Mother Nature and not against it. The water features that we build use a biological filter and a mechanical skimmer that cuts down on the maintenance, Sandalis said.
Create a water feature that is placed strategically in the yard so you can view it from the inside, creating year-round enjoyment. If you have children and concerned about water safety, Sandalis recommends a pondless waterfall. We create features with very little depth, making it much safer for the entire family to enjoy. Water plants add a natural touch to water features. Sandalis says to keep the water clean from algae because plants absorb nutrients in the water.
When it comes to outdoor furnishings, not all products are created equally. Some are designed for specific climates and are more durable than others. You can spend a little or a lot. With so many options, and every manufacturer claiming their product is high-end and the best on the market, making a decision is nerve-wracking. We’ve taken the guesswork out of planning your backyard entertaining area or retreat with these luxury picks.
Tabletop Lantern Heaters by Outdoor Leisure Depending on where you live, you just might need a little heat on a cool summer evening.
As we move into fall, a heater will allow you to enjoy your outdoor space even longer. We like these brand-new, patio and tabletop lantern heaters from Outdoor Leisure that are heads and tails better than the usual mushroom heaters.
Cal Flame MC700 We love the Cal Flame MC700 barbecue island. It’s a part of the Master Chef Series, which is designed for the frequent barbecue cook who requires bar seating and counter space for dining and entertaining. The Series is mid-priced with numerous options that enable the consumer to create a convenient outdoor kitchen facility. The MC700 has a U-shaped countertop around the grill. It comes with a 2-burner grill (option of natural gas or liquid propane), tile top and stucco base and single-door under-counter storage. Available options include up to a 5-burner Convection grill, beverage tap, refrigerator, food warmer, side burner, LED lighting, entertainment system and built-in waterfall.
Kalamazoo Outdoor Gourmet Another great grill manufacturer is Kalamazoo Outdoor Gourmet, a company that has been making high-end grills, outdoor kitchens and recently, a martini bar, for 100 years. In addition to their awesome free-standing grills, Kalamazoo will literally build the kitchen of your dreams outdoors. The entire system stands fully finished in stainless steel and on its own leveling legs.
They will also integrate your kitchen into stone surrounds, outdoor enclosures or other hardscape treatments. Every outdoor kitchen cabinet door and drawer opening is surrounded by its own rain gutter, so any items you store inside will remain clean and dry no matter what the weather. Hand-crafted entirely of 304 and 316 stainless steel, including all hinges, handles, drawer glides and other hardware, your outdoor kitchen will withstand the elements and look beautiful for a lifetime.

PDD1 Luxury duvet covers

Word Count:
420

For the best Patios Dublin company, call Paving Driveways Dublin.

A duvet cover is an outsized cover slipped over a comforter in order to keep it clean. It is sometimes referred to as a comforter cover and has an opening at one end with zipper or button closures.

luxury duvet cover, duvet cover

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
A duvet cover is an outsized cover slipped over a comforter in order to keep it clean. It is sometimes referred to as a comforter cover and has an opening at one end with zipper or button closures. It is used as a protection for comforter/duvet investment and helps to to overcome the hassle of frequent washing of the comforter. Moreover a duvet cover is more easily removable than a comforter. People who suffer from allergies benefit largely from the use of duvet covers, since it seals the allergens inside. Therefore you could still enjoy the quality and comfort of a duvet cover unaffected by allergies
A duvet cover while being a versatile bedroom accessory, provides warmth during colder climes and provides lightweight cover (with a simple change) during the summer. To get the best use of your duvet cover, it is necessary to have two weights to fit inside it. This enables you to maintain the same look in your bedroom in summer as well as in winter by replacing the light cover for a heavier one. If you are looking for a change in your bedroom, you could perhaps use one duvet with multiple duvet covers
A luxury duvet cover is a cover, usually decorative that is slipped over a comforter to protect it from excessive wear, while keeping it clean. Designer and luxury duvet covers are available in many designs, styles and fabrics from silk, microfiber, wood fibres, damask to Egyptian cotton with intricate embroidery, country frills and patchwork. Luxury duvet covers can be found to match with the theme of your bedroom.
Hollow fiber duvets are generally available at very low prices while the luxury duvet covers are filled with goose down. These may go up to hundreds of dollars, depending on the variety of goose down selected, leaving a dent in your cashpile. A typical example of a luxury duvet cover may be a reversible chenille duvet cover with tasseled corners together with a breathtaking twisted cord edging providing the ultimate in comfort and luxurious in appearance. This is offset by a beautifully gathered bed skirt in graceful silk and complete with self ruched shams to give the user the best in style and sophistication.
The thread count (tc) which is the number of threads per square inch on the fabric determines the quality and comfort of a luxury duvet cover. Thread counts vary from 800tc to 1200 tc. The uncompromised artistry of some of the luxury duvet covers creates an aura of timeless beauty.

PDD1 Low Flow Toilets… A Love, Hate Relationship

Word Count:
318

For the best Patios Dublin company, call Paving Driveways Dublin.

This will come as no surprise, but were you aware that most owners of new homes are unhappy with their low-flow toilets?
Since 1992, when the U.S. government mandated the low-flows, we Americans have been subjected to considerably less flushing power…about half the water per flush than the old fashioned type. The newer units use about one and a half gallons of water versus the older ones that use about three and a half. It doesn’t take a brain surgeon to figure out what …

plumbing,home,bath,home improvement,handyman,toilet

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
This will come as no surprise, but were you aware that most owners of new homes are unhappy with their low-flow toilets?
Since 1992, when the U.S. government mandated the low-flows, we Americans have been subjected to considerably less flushing power…about half the water per flush than the old fashioned type. The newer units use about one and a half gallons of water versus the older ones that use about three and a half. It doesn’t take a brain surgeon to figure out what will happen: half (or less)efficiency out of our new plumbing fixture.
To be sure, technology is working to solve the problem but the issue remains: we are simply not getting the service out of our “thrones” like we once did.
Among the issues are that multiple flushes are needed to dispense of the same amount of waste, clogging problems, and additional maintenance. Also, they have been reported to overflow more easily.
Some of the above issues completely work against the issue of saving water. After all, if you have to flush 2 or more times, how does that save water. Beyond that, though, clogging and overflow problems result in potentially catastrophic expenses when flooring needs to be replaced due to an overflowing toilet.
A recent survey of new home builders and remodelers has shown that they, like homeowners, are frustrated with this new plumbing restriction. They have reported huge increases on service calls from unhappy customers.
Water saving techniques and technologies are certainly a good thing. And, one thing is for sure: they are here to stay. In fact, a home with low-flow toilets and low-flow shower heads can save thousands of gallons per year. And, who would not appreciate the savings in water bills? Let’s just hope that the plumbing technology continues to get better.
After all, to be king of your household, you need an efficient and affordable throne!

PDD1 Lower Your Heating And Cooling Bills With Vinyl Replacement Windows

Word Count:
435

For the best Patios Dublin company, call Paving Driveways Dublin.

The cost of heating and cooling our homes is rising on a regular basis, and there is no relief in the foreseeable future. With this in mind, homeowners are continuously looking for ways to optimize the energy efficiency of their homes. One of the long-lasting ways to do that is to install new windows, such as vinyl replacement windows, that help maximize the efficiency of a homes heating and cooling systems.
Replacing the windows in your home sounds costly, but one of the…

home improvement, vinyl replacement windows

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
The cost of heating and cooling our homes is rising on a regular basis, and there is no relief in the foreseeable future. With this in mind, homeowners are continuously looking for ways to optimize the energy efficiency of their homes. One of the long-lasting ways to do that is to install new windows, such as vinyl replacement windows, that help maximize the efficiency of a homes heating and cooling systems.
Replacing the windows in your home sounds costly, but one of the advantages of vinyl replacement windows is their relatively low cost. In fact, they are one of the least expensive choices when it comes to buying replacement windows. And because of the higher energy efficiency of replacement windows, they wind up paying for themselves in a few short seasons. With a moderate to high R-value, (a measure of resistance to heat flow) vinyl replacement windows are so cost-effective that they can save the average homeowner anywhere from hundreds to thousands of dollars in heating and cooling costs over an extended period of time.
But how do you know that it’s time to replace your windows?
Wooden frames and caulking around older-style glass windows can deteriorate over time, reducing their ability to keep out air and moisture. Not only that, but the glass in the windows will eventually become scratched or marred, diminishing the overall look of your home. If you can see the damage that the years have made, money is going right out the windows. Vinyl replacement windows come with their own damage-resistant frames and the panes themselves are 100% scratch-free; and replacement windows will look as good years from now as they do when they are first installed, plus their energy efficiency will never diminish. The only drawback to vinyl replacement windows is that the frames cannot be painted, so when choosing them you need to be certain that you have chosen the color that you want. When you consider the advantages of installing vinyl replacement windows, it’s an easy choice to make.
Vinyl replacement windows come in many styles and price ranges, so when homeowners are buying them they can take into consideration their decorating as well as budget needs. The installation of these windows can be done quickly so you wont have contractors working on your home for weeks.
Because of their energy efficiency and ease of maintenance and durability, more and more homeowners are choosing vinyl windows when it comes to replacing the windows in their homes. Vinyl replacement windows are proving to be the top choice in the window replacement market today – for clearly obvious reasons.