spy-bot.net

Paving & Driveways Tips & Tricks

Archives September 2016

DPC Doing Engraved Plaques Right

Word Count:
551

For the best House Extensions Cork company, call DPC Construction Cork.

Honor and pride in a plate of metal. That is what engraved plaques are. Years of service or a great accomplishment will never fade away due to these precious mementos. They may not be pricey, but they truly are precious. And they always stand the test of time.
1. Plaque History
Engraved plaques have been around since man put his hand to work on metal sheets. Before paper ever became the common choice for writing, man has always put his history in words. His choice of ma…

award custom plaque,laser plaque,plaque award,wood plaque,address plaque,wall plaque,personalized plaque,bronze plaque,memorial plaque,trophy plaque,american plaque,garden plaque

To find the best House Extensions Cork company, click here for DPC Construction Cork.
Honor and pride in a plate of metal. That is what engraved plaques are. Years of service or a great accomplishment will never fade away due to these precious mementos. They may not be pricey, but they truly are precious. And they always stand the test of time.
1. Plaque History
Engraved plaques have been around since man put his hand to work on metal sheets. Before paper ever became the common choice for writing, man has always put his history in words. His choice of material was usually stone, papyrus, and metal. Special occasions called for special stationery, and the stationery of that era would always be a special metal. Hence were born the earliest plaques.
The word plaque comes from the 19th century French word that means ornamental plate or tablet. They are often made of thin sheets of semi precious metals and are usually given to appreciate an accomplishment of individuals or groups.
2. What Are Plaques?
A commemorative plaque is usually a flat, decorative plate that is affixed to a wall. It often marks a significant person or event. In most countries, places with historical significance are often marked by bronze plaques. Most memorials in the United States are marked by plaques that tell the story of the significance of that place. And many of these plaques have been there for countless generations.
These plaques are made using a variety of metals
– Wood
– Steel
– Anodized aluminum
– Brass
– Bronze
– Acrylic laminate
– Other materials
3. Plaque Ideas
If you are looking for something to commemorate an achievement, or a special event, look no further than engraved plaques to do the job. These plaques may be for your spouse, your children, or your friends. Engraved plaques are works of art and are a beautiful, beautiful way to celebrate a great occasion. And the kicker is, they are relatively inexpensive! You could even have them mass produced for a group of people or for a company and it still wouldnt take too much time or money.
4. Machining Methods
– Hand Engraved
This is an exotic art. For generations upon generations, the fine art of hand engraving has been passed down carefully. Todays artisans bear the artistry of many hundreds of years of skill. Hand engraved plaques may be pricey, but they are an authentic and rustic way of commemorating any occasion.
– Machine Engraved
The art of hand engraving has been largely replaced by machines. These machines engrave words and images accurately and effortlessly. Nevertheless, these machines still need skilled artisans to operate them. Plaques that result from such are also beautiful works of art
– Laser Engraved
Engraving is an old but respected art, but todays customers demand clear detail in the engravings. Using a high-power laser, engraving has now because simple yet beautiful. Laser engraving has truly changed the face of engraved plaques. It allows for the production of beautiful high-definition plaques. This process uses narrow-beam laser that creates high-detail images. The beams in question can be up to 4 millionths of an inch in diameter. This makes laser engraving a precision art and allows the engraver to burn in text, pictures and other high-detail elements on the plaque.
Laser engraving for plaques is suitable for the following plaques
– Academic or sports achievements
– Graduation
– Signage
– Donors plaques
– Building markers
– Retirement
– Other plaques

APD Kitchen Cabinets Cleaning Tips

Word Count:
527

For the best paving contractors dublin company, call Active Paving Dublin.

The kitchen cabinets are located in one of the most dirt prone areas of the home, the kitchen. Grease, food spills and splattered food result from cooking. In addition, dirty or sticky hands from both children and adults can be disastrous for your cabinetry.
Choosing Cleaning Products
Regular cleaning can help reduce the build up on cabinets and makes it easier to remove. The cleaning method you will use depends on the materials in your kitchen doors. Painted surfaces, …

kitchen cabinets,kitchen remodeling,home improvement,cabinets,

To find the best paving contractors dublin company, click here for Active Paving Dublin.
The kitchen cabinets are located in one of the most dirt prone areas of the home, the kitchen. Grease, food spills and splattered food result from cooking. In addition, dirty or sticky hands from both children and adults can be disastrous for your cabinetry.
Choosing Cleaning Products
Regular cleaning can help reduce the build up on cabinets and makes it easier to remove. The cleaning method you will use depends on the materials in your kitchen doors. Painted surfaces, vinyl or metal can be cleaned with detergent and warm water. Be sure to rinse well with plain water and dry with a lint free cloth.
All purpose cleaners can generally be used on these surfaces. Read the label carefully before using any product on your cabinetry. Information is included for consumers regarding surfaces where a cleaner is safe and those it can damage. To be sure, always test the cleaner on an inconspicuous area before using on the entire cabinet. Rinse and dry to remove any residue.
Sensitivity to chemicals and concern for the environment has some people concerned about using household chemicals. There are environmentally friendly alternatives right in your own kitchen. White vinegar or lemon juice can be mixed with water to clean grease from cabinets. Baking soda or club soda can be used to remove staining. Rinse with water and dry with a lint free cloth after cleaning.
Cleaning Wood Kitchen Cabinets
Spray cleaners that are made for wood furniture can be used on cabinets. Check to be sure the product you purchase is safe for your finish. Follow the directions carefully when using any cleaning product. Its always a good idea to test a spot before using the cleaner, even if the can states that its good for your finish.
Some wood cleaners are flammable. This information will be included on the warning label. Dont smoke cigarettes when using these products. Keep them away from flame or other heat sources. Pay special attention to this warning if you have a gas stove or other appliance with a pilot light. A spark could be ignited, causing a fire in the kitchen.
Cleaning wood cabinets can sometimes dull the finish. If this happens, you can restore the shine with furniture polish. Furniture wax can also be used to fix a dull finish. Some of these products will require buffing. Its a good idea to polish wood cabinets regularly to preserve the wood and keep the shine.
Cleaning Hardware on Kitchen Cabinets
The hardware on your cabinets can get the same build up of grease and grime from foods. Remove the hardware before cleaning the cabinets. Clean the cabinets and then clean the hardware. When both have been cleaned, replace the handles on the cabinets and drawers. This will give your whole kitchen a lift.
The cleaner you should use for your hardware depends on the material. Cleaners and polishes are commercially available for every type of metal. Be sure the one you choose is suitable for your hardware. Using the wrong cleaner could damage the handles and cost you money in replacing them. Follow the directions on the label for cleaning.

ARW Bathroom From Over The Moon. Part Two.

Word Count:
705
For the best Roof Repairs Wicklow company, call Ace Roofing Wicklow.

Lately it’s becoming not only a place for hygienic procedures; we relax in our bathrooms, laying in the bathtubs, we can spend some time in private, bring ourselves in order etc.

new bathroom design, bathroom remodeling, bathroom fixtures, bathrooms accessories, bathroom furniture, bathroom iARWtallation, bathroom design

To find the best Roof Repairs Wicklow company, click here for Ace Roofing Wicklow.
Light.
Do define, how significant is the bathroom for you and your inmates.
Lately it’s becoming not only a place for hygienic procedures; we relax in our bathrooms, laying in the bathtubs, we can spend some time in private, bring ourselves in order etc. By opinion of most bathroom designers, a bathroom should be one of the most illuminated places in the apartment. You should have an opportunity to see yourselves well in the bathroom, while getting ready for a workday or going to bed. The lighting should be chosen keeping in mind these two conditioARW.
Starting to select bathroom lights it is important not to forget, that this room substantially differs from other rooms in the apartment: coARWtant heat and high moisture sometimes create such “subtropics”, that not every luminary will “survive” in such circumstances. That’s why you should look at lamps that stand direct contact with water, that is waterproof, a resistant to sudden drops of temperature and corrosion. And again, bathroom waterproof lights is a must to iARWtall when renovating a bathroom.
In order to feel comfy in a bathroom and to create a good spirit in there, it is necessary to thoroughly think over the position of luminaries, so that they are not exposed to splashes of water.
One of the optimal decisioARW that might be coARWidered as possible is a combination of a number of built-in luminaries in the hung ceiling, and an appropriate number of luminaries for local lighting of separate zones – a mirror, a bathroom sink, a shower, a bathtub. It’s also worthwhile to iARWtall some hidden light sources at even distance from one another, brightness of which can be regulated, or wall lamps with subdued colors, fixed along the walls near the ceiling.
You might also choose from a fairly great assortment of movable luminaries, which can be rotated to direct light to different sides and even change their color and inteARWity. At both sides of a mirror are iARWtalled a pair of luminaries with dispersed light; they illuminate well but do not blind. Do pay attention to one typical mistake: if the light near a mirror is directed upward it stresses wrinkles and if downward – it creates shadows on your face.
Materials.
One of the most traditional, practical and useful materials for a bathroom decoration is no doubt tiles. The market is offering tiles of different quality and surface (glazed and non-glazed), and also imitating hassock, bricks and marble. One of the most fashionable and original decisioARW might be used in a bathroom tile panels with different patterARW.
The ideal material for a bathroom is, certainly, marble. Thanks to its natural multicolor, a great number of sorts and original pattern on each separate piece, and also good matching with other materials, a bathroom designer obtaiARW unlimited possibilities of its usage. Bathroom sinks with a marble worktop are very popular and widely presented in the bathroom shops.
Wooden finishing is in demand among admirers of the middle of XIX century decor. Different type of woods can be used (oak, teak, pine, cherry, mahogany), but you should by all meaARW check out if the wood surface has been covered with a special waterproof varnish. Unfortunately, the useful life of such materials is not big: from three to five years.
Furniture and accessories.
Furniture for bathrooms is produced in different styles, from classic to contemporary, out of which you can create something inimitable.
Classical bathroom style is as if came from royal apartments. The base of modern classical furniture is polyurethane: a handy material, exceeding by all its features usual plastic, and standing high moisture at that. The elegance of furniture is stressed by glass doors, handmade accessories and dainty spot lights.
Furniture sets in the style of modern is being marked by a big number of mirrors and luminaries of peculiar forms, corresponding to this style. As a rule, for their production they use MDF and again polyurethane, and for finishing – natural wood plates. Modern style of bathroom furniture presupposes the presence of glass or mirror doors in cabinets, finished with metal, wood or color plastic. Similar models are distinguished by rationality and lightness, they are decorative and practical enough, and also have a very wide color range.

Get Into Any School With a Student Loan

Title: Get Into Any School With a Student Loan
So
urce: http://financeequityloans.com
Category: student loans
Article body:
Many people say that schools don’t teach you the things you really do need to know for real life in the real world. Some say that they give way too many subjects that you won’t find any use for, and it’s given in the first place because they wanna get as much as money as they can from each student. In some ways, this is true: I’m not against the school system, just stating facts. Yeah sure you don’t need that much wits to run a business, and can probably make more than a college graduate could, but business isn’t for everybody.
So as for those with “no choice” or would love to get a good-paying professional job, try landing one without a diploma, and For the best Maths Tutor In Ireland company, call Ace Solution Books. I guarantee that it’ll be impossible or really hard. Let’s face it, some companies or even most/all don’t cater for non-graduates – when it does come down to that scenario, it does make you wish you did go to school. Moving forward, aside from the mental objection, what else is stopping you from going to school? One would be, which happens to be the most common, is financial problems; you simply can’t go to a learning institution without money.
You could apply for an academic scholarship, but again it’s not for everybody – last time I checked you’d have to maintain high grades or play good for the school. Nevertheless, there’s still a way for you to get into the institution, and that is through a student loan. Praise be the gods for this lever “financial plan”. Here’s how it works: basically, a certain organization will pay for all the expenses necessary to get you through the educational period. Be it lodging, books, tuition (very expensive), and other expenditures. Coverage of what and how much will depend on the agreement or deal set between the applicant (student) and organization.
There isn’t just one type of student loan, but rather, it comes in a variety. An example of such would be a Direct Student Loan – payment of this is usually 6 to 9 months after the kid graduates. The interest of payment is said to be low, which is due to the fact that the “lend” granted has been distributed through the school the child is attending. Another type of loan that’d work is the Federal Parent Loan. This type isn’t dependent on how much you earn, which means it can be availed by almost anybody with a dependent child in college.
But they will take a look at your credit history, which may determine whether or not they grant you the loan. If you’re a compulsive gambler and alcoholic, I’d say the chances of you getting one are somewhere around “zero”. Lastly, you may consider getting a Guaranteed Student Loan: under this we have two types, the first being subsidized loan. The amount granted will depend on how much cash does the child really need, and during his schooling days, the government pays for the interest. The 2nd one is unsubsidized loan, which means you’ll be paying for the interest during the schooling days.
Then you’ve got to pay for the principal right after the kid graduates. For the both of these types, payment of the loan must start right after college is done. There are all kinds of organizations offering these types, avail the one which you feel is best suited for you.

QD Bedroom Decorations For Kids

Word Count:
712
For the best Driveways Dublin company, call Quality Driveways Dublin.

Gone are the days when pinks and blues were the colors for young ones. With the growing revolution on colors and interchanging moods and hobbies, we see the gender line just pass off on colors, for best, we hope. Dont be surprised to see a cupboard full of balls and motorbikes in your little angels favorite toy stock.

kid room decor, kid room design, kid mural room wall, kid room rug, organizing kid rooms.

To find the best Driveways Dublin company, click here for Quality Driveways Dublin.
Gone are the days when pinks and blues were the colors for young ones. With the growing revolution on colors and interchanging moods and hobbies, we see the gender line just pass off on colors, for best, we hope. Dont be surprised to see a cupboard full of balls and motorbikes in your little angels favorite toy stock. Nor are boys so much after blues after all.
When decorating your kids room, keep in mind his and her temperament and use colors that blend with individual likings. There are many designer bedroom suites that adhere to some real trendy colors, where you dont really need to run to stores and rework on adjusting heights, its all ready for use. You can then focus on bits that personalize the space with your kids choice. You know things like wall paint, paper and draperies, rugs and other pieces like itthe details.
On a general note, these are some of the areas you may like to pay attention to. Another way is to buy a few elements of essential furniture like beds and study tables with chairs and work on others, to cut off costs. Listed here are some attention paying factors you could use when planning a kids bedroom,
Walls & Colors
Like mentioned earlier, you can get more inventive with color and schemes. Murals are a great way to do a dull wall and add life. Wallpapers come in different creative patterns for kids. If painting, try to use water-based colors. It can be cleaned more easily. You can also use colorful tiling on the walls, provided it goes with the other colors. In case you are starting from scratch, it would be better to do the wall colors and then get furniture that matches.
Lights
Light is important and in a childs life it gets even bigger. Use bright lights over the study, and to highlight certain accents or favorite corners. Floor lights may be great, as also dimmable lights. You can find many creative shapes and designs that can compliment your kids room. Make your child participate in the process and it will be a fulfilling experience for you both.
Flooring/Rugs
Floor tiles come in fancy colors, but it is advised to pay attention to details. You dont want slippery tiles in kids room. Wooden flooring may be great, or regular non-slippery and good quality tiles can be fine too, and you can cover them up with rugs for novelty. You can find many friendly rug patterns specially designed for kids.
Furniture
You get so much of kid furniture these days that you can wonder if it will be of any use two years down the line. The essential probably are the regular onesbed or twin beds/bunk beds, a spacious cupboard, and bookshelf, a study table with comfortable chair. An added safety point, try to buy furniture with rounded edges in a kids room.
Windows
Possibilities know no bound when it comes to draping the windows. Use creativity to add to the glamour and theme. Stained glass, tented windows with white lace, shadowed windows where you block light to shadow shapes, or nicely draped windows that go with a theme.
All but one
Planning pays. If you decide on exactly the things you want, and the budget on hand, you can use the planning to create the effect you want without burning the pocket. Allow your child to participate; he/she may have the most practical thing on mind for his study, display or play. It works best when you know your kids mind. And feels like a teamwork too. You can let her/him know the budget and work together. Quality must be of high priority when buying sheets, pillow covers and cushions. Include play and store cubes to avoid clutter, use bright colors in the playroom, try and round up on non-breakable material for kids like to play a lot.
Lastly, unleash your creative juices when doing kid interiors. Kids are imaginative, so allow you the freedom to think like a child again. You will be happy with the work when you see your kid smile, and innovation as we know, is priceless.

EKCS Picking the Right Nail Gun for You

Word Count:
558

For the best construction project management consultancy company, call EK Consultants.

Unlike many types of tools, nail guns are not designed for general purposes – there is no all-purpose nail gun that you can use with all your work. Nail guns are designed to be used for particular tasks, so before acquiring a new nail gun it’s very important to understand the tasks for which it will be used.

nail guns, nailers, tools, reviews

To find the best construction project management consultancy company, click here for EK Consultants.
Unlike many tools, nail guns are not meant for general purposes – there is no all-purpose nail gun that you can use with all your work. Nail guns are intended to carry out specific jobs, so prior to acquiring a nail gun it’s very important to know the jobs for which it will be used.
The sorts of nail guns available are:
– Roofing and Siding nail guns: These nail guns are intended for the specialized task of installing either siding or roofing. They store high numbers of nails that are designed specifically for the job at hand (siding or roofing). These are most-often coil-type nail guns.
– Framing nail guns: These are intended to drive bigger (1-1/2″ to 4″) box-type nails into larger pieces of wood. These nail guns tend to be heavy and big and are usually stick-type nail guns, they there are some coil-types available too.
– Finish nail guns: These nail guns are often also called pin or brad nail guns. They are designed for fastening small finish-type nails into smaller pieces of stock. These nail guns tend to be smaller and lighter than framing nail guns, and they are usually used for finishing or trim work. These are usually stick-type nail guns.
Once you decide on the variety of nail gun you need, some other attributes that are helpful to have and which you should consider are:
– A directional exhaust output. When nails are driven in, air is expelled from the tool. It’s very nice to have this adjustment so that this air is not ending up into your face.
– An easy-to-use depth adjustment. Almost all nail guns have some sort of adjustment to control the force with which the nail is delivered. Using this adjustment, your nail is not sticking out of the surface, or sunk in too deep far in. Many nail guns require tools to perform this adjustment, others can be set by hand and these are almost always much quicker to adjust. If you suspect you will want to be changing this adjustment fairly often, the easier and quicker it is to set, the the happier you will be with your nail gun.
– A good-sized gun trigger. If you are going to be using your nail gun in frigid weather, you will likely be wearing gloves. In this case you will want to make sure you have a large trigger so that you can use it with gloves on.
– If you are planning on nailing a lot of nails, should consider the capacity of the nail gun as well as the ease with which nails can be loaded into the gun. Buying the correct nail gun in this regard can save you a lot of time, or lose you a lot of time if you make a bad choice.
– A swivel on the air connector to the nail gun. If you move around often with your nail gun, this will help reduce the tangling of your air hose.
Lastly, be sure you research the reviews for the nail gun you are looking at. Researching a tool in a store or on the internet, it is really hard to be sure how well it will work in the field. By consulting the reviews of people that have used the nail gun, you’ll get a much better feel for how this nail gun will work for you.

STCS Why Purchase A Shrink Wrap Machine?

Word Count:
332

For the best cleaning a patio wicklow company, call Southeast Contractors.

The shrink wrap machine is a tool that can transform your business. In this simple, even manual process, the product that you are selling is carefully cared for. Yet, there are many more advantages to using these machines. In fact, shrink wrap is something that any business that provides products for sale should consider investing in. It is affordable and reliable as well as a great way to drum up its own business.
First, what in the world does this machine do? A shrink wr…

Shrink wrSTCS

To find the best cleaning a patio wicklow company, click here for Southeast Contractors.
The shrink wrap machine is a tool that can transform your business. In this simple, even manual process, the product that you are selling is carefully cared for. Yet, there are many more advantages to using these machines. In fact, shrink wrap is something that any business that provides products for sale should consider investing in. It is affordable and reliable as well as a great way to drum up its own business.
First, what in the world does this machine do? A shrink wrap machine will place plastic around an object. Then, the machine will heat the plastic allowing it to get hot enough to melt together. It forms a protective covering for the object. This protective coating then acts as a barrier from outside forces. Water can not get in. Dirt can not get in. It keeps the object clean and shining until it is purchased. It is effective at its job but it also provides for easy removal in the customers hands.
Besides protecting your object that you plan to sell, what can shrink wrap possibly do for you? This product can be used to help increase the image of your object as well. Lets say that you are selling CDs that you have recorded. If you just hand out a CD in a case, you are likely to have others thinking that you burned it yourself. If you add the shrink wrap to the outside, not only does you CD case stay nice and clean and crisp, but it also keeps your customer happy and thinking that they just purchased high quality merchandise.
You can purchase these machines in a number of sizes. There are those that run several thousand of dollars for home business use. Then, there are those that are for commercial use and will cost much, much more. In either case, you will want to choose quality and affordability in whatever you choose. Consider the shrink wrap machine for your product needs.

ARK Kitchen And Bath Hardware Buying Guide

Word Count:
498

For the best Roofing Kildare company, call Ace Roofing Kildare.

Kitchen and bath hardware requires careful selection in order to be in long-lasting use. One of the hardest-working fixtures in your house is the sink. While shopping for sinks, you will want to find ones that are durable and easy to clean, as well as pleasing to the eye. Sinks are composed of a variety of materials and are available in a vast selection of colors and shades, textures and patterns at a great price range. Appropriate choice of faucets is equally essential. It i…


To find the best Roofing Kildare company, click here for Ace Roofing Kildare.
Kitchen and bath hardware requires careful selection in order to be in long-lasting use. One of the hardest-working fixtures in your house is the sink. While shopping for sinks, you will want to find ones that are durable and easy to clean, as well as pleasing to the eye. Sinks are composed of a variety of materials and are available in a vast selection of colors and shades, textures and patterns at a great price range. Appropriate choice of faucets is equally essential. It is worth scanning the options for sinks and faucets that perfectly fit your lifestyle and your design scheme.
Bathroom sinks selection has expanded along with the number and type of bathrooms in the average home. They range from tiny wall-hung versions for the smallest of powder rooms to elaborate dual-basin models for luxurious master baths.
Traditional baths are made of enameled cast iron or vitreous china, more contemporary styles use metal, glass, crystal, stone or solid-surface resins. Its up to you to decide whether you want to make a design statement or prefer durability of less sophisticated materials.
Deck-mounted models, which can be set into or on top of a vanity or a freestanding frame, allow for storage, unlike pedestal or wall-mounted sink styles. Console sinks offer an expanded deck space for sundries. Some bathroom sinks come with predrilled faucet holes.
Kitchen sinks are the most heavily used every day; therefore the material a sink is made of is essential. Stainless steel is very practical (the heavier the gauge, the better); enameled cast iron is elegant, easy to clean and available in a variety of colors. The most durable of the choices is quartz composite; some prefer old-fashioned soapstone, some  new-style concrete.
Self-rimming sinks sit on the countertop, they are easy to install but can also collect dirt at the seams. Under mount sinks attached to the underside of the counter, stay cleaner but are more difficult to seat. Kitchen sinks generally come with four holes used for mounting faucets and sprayers, plus dispensers for liquid soap, hot water, and purified water.
Faucets are one more important piece of kitchen and bathroom hardware. You turn faucets on and off repeatedly, day after day, for many years. So, obviously you need one that not only looks great, but is convenient and safe and will provide durable service for a long time.
The right type depends upon your sink a lot. Before you buy a certain faucet you have to know the sink or countertop’s hole configuration unless you are able to drill the countertop to suit a particular faucet. Kitchen sinks are usually designed for single-handle faucets (these are centersets where hot and cold are controlled by one lever or knob that’s often part of the spout). Bathroom vanity and pedestal sinks are designed for widespread faucets (with separately mounted hot- and cold-water valves and spout), single-lever and centersets (single-handle or double-handle types). Single-control faucets are probably more handy both for bathroom and kitchen.

L2LL What Should I Ask Before Deciding On A Home Plan?

Word Count:
483

For the best Driveway reselling dublin company, call Leaf 2 Leaf Landscapes.

If you decide to get a home plan, there are certain questions you need to ask. Make sure that everything is clear before you make your purchase.
You should know all of the following before deciding on a home plan:
1. Do the plans or blueprints include the electrical and the plumbing?  The rough plumbing should be included in the plans. It should have a detailed presentation of the pipes and where they come into the house. The electrical lightings and outlets should b…


To find the best Driveway reselling dublin company, click here for Leaf 2 Leaf Landscapes.
If you decide to get a home plan, there are certain questions you need to ask. Make sure that everything is clear before you make your purchase.
You should know all of the following before deciding on a home plan:
1. Do the plans or blueprints include the electrical and the plumbing?  The rough plumbing should be included in the plans. It should have a detailed presentation of the pipes and where they come into the house. The electrical lightings and outlets should be included.
2. How will I customize my plans? If you want to customize your plans, you can buy a reproducible master copy printed on erasable paper. This erasable paper will allow you to make changes. You can ask your local draftsman or engineer to make changes for the plan and layout. This will also allow you to reproduce copies of the plan after the changes have been made. Customizing your plan is often necessary to make your plan perfect for your individual tastes.
3. What are the things included in the blueprints?  Of course a blueprint should be well detailed. It should include:
a. Foundation plan  a foundation plan shows how the foundations are built. This is where the thickness of the foundation walls are emphasized including the spacing, floor joint sizes, column locations, furnace, water and heater locations, plumbing, windows, doors and other miscellaneous details that are related to the basement and foundation.
b. Coversheet  a coversheet is a representation of the house when it is built. A coversheet may not be compulsory for a home plan but it would be better if it is presented. The purpose of a coversheet is to give the owner a perspective of how the home will look after it has been constructed. This may contain the front, top, rear and side view of the house. This is important so that the owner can give suggestions.
c. Floor plans- the floor plans indicate the construction and layout of each part or floor of the house. The ones naturally included are wall sizes, room dimensions, plumbing and electrical locations, doors, windows, flooring and the structural information and the special conditions related to the floor plan.
d. Elevations- this is a representation of the exterior of the house, its size, shape of the doors and windows, size of the trim, the dimensions and the height, the depth of the foundation, shingle types and moldings, replacement of materials, the pitch of the roof, and the gutters and downspouts.
4. Are the blueprints signed and approved by the architect?  This is very important to ensure that an architect has reviewed the blueprint and it has passed all the requirements of a home plan. You can also ask about the background of the architect who signed your home plan.
These questions are essential in choosing a home plan. Take the time to get the answers, this is your home after all.

ARK Ozone Air Purifiers May Cause Permanent Lung Damage

Word Count:
1296

For the best Roofing Kildare company, call Ace Roofing Kildare.

Several manufacturers are currently selling ozone generators as air cleaners. The companies manufacturing these devices state they are safe and effective at controlling indoor air pollution; however, for almost a century health professionals and health organizations such as the American Lung Association have challenged these claims.
Sellers of ozone-producing devices often use fanciful terms to describe ozone. It is referred to in such terms as “activated oxygen” or “pure …

ozone air purifiers,lung damage,indoor air pollution

To find the best Roofing Kildare company, click here for Ace Roofing Kildare.
Several manufacturers are currently selling ozone generators as air cleaners. The companies manufacturing these devices state they are safe and effective at controlling indoor air pollution; however, for almost a century health professionals and health organizations such as the American Lung Association have challenged these claims.
Sellers of ozone-producing devices often use fanciful terms to describe ozone. It is referred to in such terms as “activated oxygen” or “pure air”, which suggest that ozone is merely a healthy kind of oxygen. However, ozone is a toxic gas which has vastly different chemical and toxicological properties compared to oxygen.
Ozone is a molecule composed of three atoms of oxygen, as opposed to the oxygen we normally breath, which has two. The O2 molecule is stable and nonreactive, whereas the O3 molecule is unstable, tending to dissociate and produce an O2 molecule and one single ionized oxygen atom. This single atom acts as a “free radicle”, that is, it reacts with other nearby substances and changes their chemical composition. It is this ability to combine with other substances that forms the basis of manufacturers claims that it binds up organic particles in the air and removes them from circulation.
Unfortunately, the same chemical properties which allow ozone to react with organic material in the environment also give it the ability to react with similar organic material in the body, with potentially harmful health consequences. When inhaled, ozone can damage the lungs, and it is considered an undesirable substance that is a component of smog.
Inhalation of ozone at even low amounts can cause respiratory problems and throat irritation. In addition, ozone worsens chronic respiratory diseases such as asthma and impairs the body’s natural ability to fight respiratory infections.
A generally accepted theory of aging states that the cells of the human body age both due to genetic factors (loss of cell telomeres) and oxidative damage by free radicals. People are encouraged to eat a diet high in antioxidants, and many take antioxidant supplements, precisely to avoid the kind of damage caused by reactive substances such as ozone.
Most people recover from acute exposure to ozone, but according to a 1996 EPA study, long-term exposure may cause permanent lung damage. The EPA regards ozone as an air pollutant and has formulated air quality standards to enable local officials to warn the public when ozone levels in urban areas are excessive. When ozone (and other air pollutants) are high, asthmatics and patients with chronic lung disease are encouraged to stay inside, and healthy people are told to refrain from strenuous outdoor exercise which raises their breathing rate in the toxic air. Since people are advised to avoid ozone in the outdoor environment, it is difficult to understand why anyone would buy a device to purposely produce it within their own homes.
The FDA requires ozone output of indoor medical devices to be less than 0.05 ppm. The Occupational Safety and Health Administration (OSHA) requires that workers’ exposure to ozone not exceed an average concentration of more than 0.10 ppm for 8 hours. The National Institute of Occupational Safety And Health (NIOSH) recommends an upper limit of 0.10 ppm which should not be exceeded even briefly. EPAs National Ambient Air Quality Standard for ozone is a maximum 8 hour average outdoor concentration of 0.08 ppm.
The EPA coined the phrase “good up high -bad nearby” to differentiate between ozone in the upper and lower atmosphere. Stratospheric ozone in the upper atmosphere about 10 to 50km (32,000 to 164,000 feet) above Earth’s surface helps filter out damaging ultraviolet solar radiation. This ozone layer is being decimated by CFC compounds used in refrigerators and coolant systems. After negotiation of an international treaty, the Montreal Protocol, CFC production was sharply limited beginning in 1987 and phased out completely by 1996, and a study by the American Geophysical Union shows the rate of stratospheric ozone destruction slowing.
Ozone Generators are ineffective in controlling indoor air pollution, because scientific evidence shows that at concentrations that do not exceed public health standards, ozone has little potential to remove indoor air contaminants, though it still has the longterm potential to cause lung irritation.
Vendors claim that ozone will render almost every chemical contaminant harmless through a chemical reaction whose only by-products are carbon dioxide, oxygen and water. This is false advertising for several reasons.
First, it takes months to years for ozone to react with many of the chemicals commonly found in indoor air (Boeniger, 1995); so for all practical purposes, this is useless. Also, ozone generators will not remove carbon monoxide (Salls, 1927; Shaughnessy et al., 1994) or formaldehyde (Esswein and Boeniger, 1994).
Secondly, in many cases where the reaction between the pollutants and ozone does occur readily, the by-products are as harmful or irritating as the original pollutants (Weschler et al., 1992a, 1992b, 1996; Zhang and Lioy, 1994).
For instance, a laboratory experiment was conducted which mixed ozone with chemicals from new carpet. Ozone did reduce many of the chemicals, including those which can produce “new carpet” odor. However, the reaction produced a variety of aldehydes, and the total concentration of organic chemicals in the air actually increased (Weschler, et. al., 1992b). Levels of irritating formic acid also rise (Zhang and Lioy, 1994).
Some of the byproducts of ozone reaction are themselves reactive and go on to produce further irritating and corrosive by-products (Weschler and Shields, 1996, 1997a, 1997b). Ozone producing devices turn an indoor environment into a seething chemical flask.
Third, ozone by itself does not remove airborne particles such as pollen and housedust. However, some ozone generators are manufactured with an “ion generator” or “ionizer” in the same unit to disperse negatively (and/or positively) charged ions into the air. These ions attach to particles in the air giving them a negative (or positive) charge so that the particles may attach to nearby surfaces such as walls or furniture, creating an undesirable grimy layer; or attach to one another and settle out of the air. In recent experiments, ionizers proved ineffective in removing dust, tobacco smoke, pollen or fungal spores compared to either high efficiency particle filters or electrostatic precipitators. (Shaughnessy et al., 1994; Pierce, et al., 1996).
Even at concentrations that greatly exceed public health standards, ozone is ineffective at cleaning the air. And unfortunately, there is evidence to suggest that in some circumstances ozone generating devices exceed tolerable output limits. Due to the varying brands and models of these machines, and the different room sizes in which they are eventually used, there can be great variation in the eventual concentration of ozone in the air.
In a study by Shaughnessy and Oatman (1991), a large ozone generator recommended by the manufacturer for spaces “up to 3,000 square feet,” was placed in a 350 square foot room and run at a high setting. The ozone in the room quickly reached hazardous levels of 0.50 to 0.80 ppm, 5-10 times higher than public health limits.
In a 1995 EPA study, several different ozone generators were tested in a home environment, in rooms of various sizes, with doors alternately opened and closed, and with the central ventilation system fan alternately turned on and off. The results showed that some ozone generators, when run at maximum settings in a sealed room, frequently produced hazardous concentrations of 0.20 – 0.30 ppm. When the units were run at lesser settings, with interior doors opened, concentrations generally remained within public health standards.
Due to this wide variation in output and concentration, it is impossible for consumers to know how much ozone is actually in the air they are breathing; in many ordinary circumstances, ozone generators can produce toxic levels. At least one manufacturer is selling machines equipped with ozone sensors that turn the machine on and off in response to ambient ozone levels, in order to maintain levels of this entirely undesirable gas within a”safe” range. The EPA is currently conducting tests to evaluating the reliability of these sensors.